The Micromag Magnetic Filtration system incorporates the most powerful, natural, rare earth magnetic material to produce extreme magnetic flux fields to remove metal debris from fluids.
The units can be mounted onto existing filtration systems or directly to machinery and the Micromag is easily viewed and the fluid can be seen passing over the magnetic core where ferrous debris is visibility removed. The powerful magnetic core will attract down to sub micron ferrous particles. Removing the aggressive particles from your fluids. The unit has an anodized aluminium head and a clear filter bowl manufactured from Styrene Acrylo Nitrile (SAN). There are no parts to replace during cleaning. These can also be used on oils and water based fluids.
Contaminated fluid enters the inlet to be equally dispersed via radial channels, which slow the fluid down to pass over the outside of the centrally mounted rare earth magnetic core. As more particles are attracted to the core the magnetic flux circuit geometry generates a controlled build up contamination, so ensuring that the filter cannot block. The fluid then returns to the flow circuit through the central core.
Micromag may be compact in size 5", 10" and 20" units but no other filter can match its capability with the units holding 900g, 1800g and 3800g respectively, resulting in less downtime, component protection and increased production.
Advantages of MicroMag Magnetic Filters
Visual Inspection
Reduced Downtime
Complete Package
No Consumables
No Cartridges
If particles are magnetic the filter will trap them
Reduced environmental impact
No pressure drop, even when full of contamination
Easy to install and to maintain
Cleaning
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds. Only metallic particles are removed from the filter and these can be easily disposed.
There are no dirty cartridges!
